UL Listed Copper Bonded Rod Manufacturer & Supplier in India

UL listed copper bonded ground rod with UL mark, UL File No. E511876, by SG Power
Product Drawing

Show all variants

14 mm▼
2 metre▼
SS Clamp▼

Description

TRUESAFE™ Chemical Earthing manufactured by SG Power Products Pvt. Ltd. is a high-quality Copper Bonded Rod designed for efficient electrical grounding applications. This model features a 14 mm diameter rod with 2 metre length, providing reliable current dissipation and long service life in earthing systems.

The rod is manufactured using E250 grade steel core with a copper bonded layer for superior conductivity and corrosion resistance. It complies with IS3043 standards and is supplied with SS Clamp clamp for secure electrical connections. This rod is UL & CPRI tested.

Datasheet (PDF)
Technical Data
ManufacturerSG Power Products Pvt. Ltd.
ProductTRUESAFE™ Chemical Earthing
ModelCBR14SG200
MakeSGPL
Material DescriptionCopper Bonded Rod
Dia of Rod14 mm
▼

SG Power Products Pvt. Ltd., based in Noida (Delhi NCR), is a UL listed copper bonded rod manufacturer in India, with copper bonded ground rods listed to UL 467 under UL File No. E511876. Every rod has a minimum copper coating of 254 microns (10 mils). The rods are made at our Duhai Industrial Area factory in Ghaziabad, Uttar Pradesh, and are certified by UL for both the US (UL 467) and Canada (CSA C22.2 No. 41). As a direct UL listed copper bonded rod supplier, we support EPC contractors, consultants and owner's engineers on projects where the specification calls for UL listed grounding electrodes.

SG Power has supplied earthing and lightning protection materials for over 15 years to organisations including Indian Railways, L&T, NTPC, BHEL, Tata, Adani Power and the Airport Authority of India.

UL listing at a glance

ItemDetail
StandardsUL 467, Edition 11 (2022), Grounding and Bonding Equipment (US); CSA C22.2 No. 41:22 (Canada)
UL File No.E511876
UL categoryKDER (US) and KDER7 (Canada), Grounding and Bonding Equipment
Listed modelsSGPCBR-1403, SGPCBR-1703, SGPCBR-2003, SGPCBR-2503
Verify onlineSearch E511876 in UL Product iQ
Listed sizes14, 17, 20 and 25 mm diameters
Copper coating254 microns (10 mils) minimum, molecularly bonded to a low-carbon steel core
Manufactured atPlot No. 695-696, Duhai Industrial Area, Ghaziabad, Uttar Pradesh 201206

Buy UL Listed Copper Bonded Rods: Quick Details

DetailWhat you get
Listed sizes14, 17, 20 and 25 mm diameters (UL File No. E511876)
Copper coating254 microns (10 mils) minimum, meeting UL 467
DeliveryPan-India, direct to project sites
DocumentsUL certificates (US and Canada), datasheet and test certificates for submittal

What Is a UL Listed Copper Bonded Rod?

A UL listed copper bonded rod is a copper bonded earth rod that UL (Underwriters Laboratories) has tested and certified to UL 467, and whose maker is under UL's ongoing follow-up inspection. The rod has a high-tensile, low-carbon steel core with electrolytic copper molecularly bonded to its surface. The steel gives strength for driving; the copper gives conductivity and corrosion resistance.

In specifications and on site, the same product is also called a UL listed copper bonded ground rod, grounding rod, earth rod, earthing rod or copper bonded grounding electrode. Indian specifications usually say "earthing", while specifications based on US standards say "grounding".

"Listed" means more than "tested once". UL checks the product against the standard, records it under a file number, and audits the factory periodically. A rod described only as "conforming to UL 467" or "UL 467 grade" has not necessarily been through that process.

Buyers often search for "UL approved" or "UL certified" copper bonded rods. UL does not "approve" products; it tests and lists them. On a specification or purchase order, the correct term for ground rods is UL listed, followed by the UL file number.

What UL 467 covers for ground rods

UL 467 sets requirements for grounding and bonding equipment, including ground rods. The current edition is Edition 11, issued 29 April 2022, and it is the edition SG Power's rods are certified to. For copper bonded rods, the checks typically include:

Copper coating thickness and how firmly it is bonded to the steel

Adhesion: the copper must not peel or crack when the rod is bent or driven

Dimensions: diameter and length within tolerance

Marking: each rod carries the maker's name or mark, the UL mark and its size, so it can be identified on site

For Canada, the matching standard is CSA C22.2 No. 41, Grounding and Bonding Equipment. UL lists products certified to it under category KDER7, so one UL file can cover both countries, often shown as the cULus mark.

Many US-based specifications also cite ANSI/NEMA GR 1, the product standard for grounding rod electrodes and couplings, alongside UL 467. Manufacturer datasheets for listed rods commonly reference both.

UL Listed Rods on Indian Projects: IS 3043 and NEC

Indian projects normally design earthing to IS 3043. UL listing comes in when the project specification follows US standards, such as the NEC (NFPA 70), or when the owner's global engineering standard requires UL listed grounding. Many projects use both: earthing designed to IS 3043, with UL listed rods as the electrodes.

Specification basisTypical projects in IndiaRod requirement
IS 3043 onlyDomestic utilities, government, commercial buildingsCopper bonded rods to IS 3043; UL listing not required
NEC / NFPA 70 or owner's US-based standardData centres, US and multinational owners, oil and gasUL listed rods, by file number
IS 3043 design with UL listed electrodesMultinational factories, EPC projects for global ownersUL listed rods, installed to the IS 3043 design

Technical and Commercial Advantages of UL Listed Copper Bonded Rods

AdvantageEngineering basisProcurement impact
Third-party certificationTested by UL to UL 467; periodic factory follow-upFewer submittal queries; no separate type-test demand
Minimum copper thickness10 mils (0.254 mm) minimum for UL listed rodsDefined coating, checkable against the listing
Bond integrityCopper electrolytically bonded to steel; listing tests check adhesionLower risk of coating damage during driving
Mechanical strengthHigh-tensile, low-carbon steel coreSuitable for deep driving and coupled sections
Corrosion resistanceCopper protects the steel core in moist and saline soilLower replacement and re-excavation cost
TraceabilityUL mark, maker's mark and size within the top 12 in (305 mm)Easy incoming and post-installation inspection
Cost compared with solid copperSteel core with copper surfaceLower unit price than solid copper rods

Types of UL Listed Copper Bonded Rods

SG Power makes UL listed copper bonded rods in four types, so you can match the rod to your soil depth and connection method.

1

Threaded UL Listed Copper Bonded Rod (Sectional)

Rolled threads at both ends; joined with couplers to reach the depth the design needs. Used for substations, data centres and high-resistivity soil.

View threaded rods
2

Unthreaded (Pointed) UL Listed Copper Bonded Rod

A single-length rod with a pointed end, driven in one piece with no couplers. Used where one rod length meets the target resistance, such as buildings, telecom shelters and solar arrays.

View unthreaded rods
3

UL Listed Copper Bonded Rod with Palm Terminal

A flat palm terminal on top gives a fast, bolted conductor connection that can be inspected, without welding.

View palm variant
4

UL Listed Copper Bonded Rod with Clamp

Supplied with a ground clamp for round conductors or cables, for equipment and lightning protection earthing.

View clamp variant

Types at a glance

TypeJoiningBest forTypical depth
Threaded (sectional)Couplers between rodsDeep earthing, high-resistivity soil, substations, data centresMultiple rod lengths
Unthreaded (pointed)None, single pieceBuildings, telecom, solar arraysOne rod length
With palm terminalBolted palm connectionQuick, inspectable connectionsOne or more rods
With clampClamp to conductorEquipment and lightning protection earthingOne or more rods

How to Choose the Right UL Listed Copper Bonded Rod

Choose the rod from your project specification and site data, not from a fixed rule. Check these six points in order.

1. Confirm the specification asks for UL listing

Read the earthing clause of your project specification. If it names UL 467 or "UL listed", you need a rod with a UL file number. If it only names IS 3043, a standard copper bonded earth rod may cost less.

2. Check soil resistivity and the target resistance

Measure soil resistivity at the site; the target earth resistance comes from the project design and applicable standard. Low-resistivity soil may meet the target with one rod. High-resistivity or rocky soil, and low targets such as substations and data centres, usually need deeper threaded rods, several rods in parallel, or backfill compound.

3. Pick the diameter by driving conditions

Site conditionSuggested diameter
Soft or normal soil, shorter depths5/8"
Hard or stony soil, deep driving, heavy-duty sites3/4"

A thicker rod resists bending when driven hard. Diameter has only a small effect on earth resistance; depth matters more.

4. Pick the length and type by depth

One rod length meets the target → unthreaded (pointed) rod

Target needs more depth → threaded rods with couplers, extended until the target is met

Space for several rods → rods in parallel, spaced as IS 3043 advises so they do not reduce each other's effect

5. Choose the connection

Fast bolted joint you can inspect → rod with palm terminal

Round conductor or cable → rod with clamp

Permanent, maintenance-free joint → exothermic weld

If the specification asks for a fully listed system, choose couplers and clamps that are UL listed too.

6. Check the listing covers your size

Confirm that the exact diameter and length you order appear under UL File No. E511876 in Product iQ. SG Power's listed models are SGPCBR-1403 (14 mm), SGPCBR-1703 (17 mm), SGPCBR-2003 (20 mm) and SGPCBR-2503 (25 mm); ask for the model number on the quotation. A custom size outside the listing is not UL listed.

Quick selection guide

ApplicationSuggested rod
Data centre or substation3/4" threaded rods with listed couplers, driven to design depth
Commercial building5/8" unthreaded rod, or threaded if soil is poor
Solar array5/8" unthreaded rods at each array earth point
Telecom shelter5/8" or 3/4" rod with clamp
Rocky or hard ground3/4" rod, with backfill compound where depth is limited

Need a design check? Share soil resistivity data, prospective fault current and target earth resistance. Our application engineers will propose rod type, size, depth and quantity against your specification.

UL Listed vs Non-Listed Copper Bonded Rods

The rod may look the same, but only a listed rod comes with proof a consultant can verify.

FeatureUL listed copper bonded rodNon-listed copper bonded rod
Third-party certificationCertified by UL to UL 467Usually maker's own test claim
Verifiable onlineYes, by UL file number in Product iQNo public record
Factory follow-upPeriodic UL inspectionsNone from UL
Marking on rodUL mark, maker, sizeVaries by maker
Accepted where UL is specifiedYesUsually rejected at submittal
Canadian certificationAvailable where listed to CSA C22.2 No. 41 (category KDER7), as SG Power's rods areNo
Typical useData centres, oil and gas, US-standard and multinational projectsGeneral commercial and domestic earthing
PriceHigherLower

If your specification does not call for UL listing, our standard copper bonded earth rods built to IS 3043 may be more economical. That page also compares copper bonded rods with GI, solid copper and stainless steel rods.

UL Listed Copper Bonded Rod Sizes, Specifications & Price List

Every diameter below is covered by UL File No. E511876 (models SGPCBR-1403, 1703, 2003 and 2503), with a minimum copper coating of 254 microns (10 mils). Prices are indicative per piece, ex-works, and vary with quantity.

Rod (UL model)DiameterLengthCopper coatingPrice from
UL Listed Copper Bonded Rod 5/8" x 8 ft (SGPCBR-1403)5/8" (14.2 mm shank)2.4 m254 µm (10 mils) min.Depend on LME Price
UL Listed Copper Bonded Rod 5/8" x 10 ft (SGPCBR-1403)5/8" (14.2 mm shank)3.0 m254 µm (10 mils) min.Depend on LME Price
UL Listed Copper Bonded Rod 3/4" x 8 ft (SGPCBR-1703)3/4" (17.2 mm shank)2.4 m254 µm (10 mils) min.Depend on LME Price
UL Listed Copper Bonded Rod 3/4" x 10 ft (SGPCBR-1703)3/4" (17.2 mm shank)3.0 m254 µm (10 mils) min.Depend on LME Price
UL Listed Copper Bonded Rod 20 mm x 10 ft (SGPCBR-2003)20 mm3.0 m254 µm (10 mils) min.Depend on LME Price
UL Listed Copper Bonded Rod 25 mm x 3 m (SGPCBR-2503)25 mm3.0 m254 µm (10 mils) min.Depend on LME Price

Prices track the LME copper rate on the quotation date and are quoted ex-works per piece. * Prices are indicative. For the latest price, contact SG Power.

Material specifications

ParameterValue
CoreHigh-tensile, low-carbon steel
Copper99.9% pure electrolytic copper, molecularly bonded
Copper coating thickness254 microns (10 mils) minimum, the UL 467 requirement for listed ground rods
ThreadsRolled, not cut, to keep the copper layer intact
StandardsUL 467 Ed. 11 and CSA C22.2 No. 41:22 (UL listed, File No. E511876); also designed to IS 3043 and BS EN 62561-2
MarkingUL mark, SG Power mark and size on each rod

Custom lengths outside the listed range can be made, but they are not UL listed. We will say so clearly on the quotation.

Request a firm price for your bill of quantities. Send diameter, length and quantity; the offer includes the UL listing reference and datasheet for submittal.

Where UL Listed Copper Bonded Rods Are Required

UL listed rods are usually specified where the owner, consultant or code calls for third-party certified grounding.

SectorWhy UL listing is specified
Data centresGlobal operators apply one grounding specification across sites
Oil, gas and petrochemicalInternational EPC and owner specifications
Overseas projects executed by Indian EPCsRequired by US and many Middle East specifications
Multinational factories and campusesCorporate engineering standards call for UL listed parts
Solar and renewable energyLender and owner technical specifications
Telecom and network sitesOperator grounding standards
Airports, metro and defenceConsultant specifications for critical infrastructure

SG Power's UL Certificate of Compliance

UL issued SG Power two Certificates of Compliance on 2 July 2024: one for the US market and one for Canada. Both name SG Power Products Pvt. Ltd. as the certificate holder and cover the same four copper bonded grounding rod models.

ItemUS certificateCanada certificate
Certificate numberUL-US-L511876-11-41210202-2UL-CA-L511876-31-41210202-2
UL categoryKDER, Grounding and Bonding EquipmentKDER7, Grounding and Bonding Equipment Certified for Canada
StandardUL 467, Edition 11, issue date 29 April 2022CSA C22.2 No. 41:22, 7th edition, issue date 29 April 2022
Report referenceE511876-20201214E511876-20201214
ModelsSGPCBR-1403, SGPCBR-1703, SGPCBR-2003, SGPCBR-2503Same four models
Issued toSG Power Products Pvt. Ltd., Plot No. 695-696, Duhai Industrial Area, Meerut Road, Ghaziabad, Uttar Pradesh 201206Same
Date2 July 20242 July 2024

How to read a UL certificate for ground rods

File number (E511876). This is the number to search in UL Product iQ. The "L511876" inside the certificate number refers to the same file.

Category code. KDER is UL's category for grounding and bonding equipment, which includes ground rods. KDER7 is the same category certified for Canada.

Standard and edition. UL 467 Edition 11 (2022) is the current edition. A certificate citing an older edition is not wrong, but ask whether the listing has been updated.

Models. Only the listed models are certified. Match the model or size on your quotation to the certificate's model list.

Issued to. The company named should be the maker, or the brand your supplier is authorised to sell.

A certificate shows that representative samples passed UL testing. As the certificate itself states, the right to apply the UL mark comes from UL's follow-up services, and only rods that carry the UL mark count as UL certified. So check the certificate, then look for the mark on the rods delivered.

How to Verify a UL Listed Copper Bonded Rod

Check the listing yourself before you approve any supplier, including us.

1

Ask the supplier for its UL file number.

2

Search that number in UL Product iQ and confirm the company name and the category: KDER for the US, KDER7 for Canada.

3

Check that the diameter and length you are ordering are covered by the listing.

4

On delivery, check that each rod carries the UL mark, the maker's mark and the size.

SG Power's listing: UL File No. E511876, categories KDER and KDER7. Search E511876 in UL Product iQ.

What to Look For in a UL Listed Copper Bonded Rod Supplier

A UL listed rod is only as reliable as the supplier's proof behind it. Use these six checks as a vendor evaluation checklist.

1

Verifiable UL listing. The file number (for SG Power, E511876) must be in the supplier's name (or the brand it supplies) in Product iQ, cover your exact diameters and lengths, and appear as a UL mark on every rod.

2

Manufacturer or authorised supplier. Buy from the listed manufacturer or a supplier it authorises in writing, so every batch stays traceable.

3

Copper bonding quality. The copper should not peel or crack when a rod is bent. Ask for the minimum copper thickness and the batch test certificate.

4

Listed accessories where required. If the specification asks for a fully listed system, couplers and clamps must be listed too.

5

Submittal-ready documents. UL listing, datasheet, test reports and material test certificates in a form your consultant accepts.

6

Stock, lead time and delivery. Ready stock of listed sizes, lead times for bulk orders and delivery to your site.

Warning signs

"UL 467 compliant" or "UL grade" with no file number

A file number that does not appear in Product iQ, or appears under another company with no authorisation

No UL mark on the rods delivered

A price far below other listed suppliers for the same size

Quality Assurance and Inspection

Each production batch is checked against the UL listing and our quality plan before dispatch.

StageCheckRecord
Raw materialSteel grade and copper purity against mill certificatesMill test certificate
Copper coatingCoating thickness against the 254-micron (10 mil) minimumBatch thickness record
Bond adhesionBend test on samples from each batchTest record
DimensionsDiameter, length, thread and straightnessInspection report
MarkingUL mark, maker's mark and size within the top 12 in (305 mm)Visual check
DispatchQuantity, size and packing against the orderPacking list

Quality plan: a project-specific QAP can be submitted for approval.

Third-party inspection: stage or pre-dispatch inspection by the client or its agency is accepted on agreed dates.

Quality system: ISO 9001:2015 certified quality management system for chemical earthing electrodes, copper bonded rods, earthing pit covers, earthing compound and lightning arresters. Certificate No. IN8514A, issued by Integral Certification (P) Ltd. (EGAC accredited, IAF MLA member).

SG Power Supplier Profile

CriterionSG Power
Business typeManufacturer and direct supplier, with in-house manufacturing at Duhai Industrial Area, Ghaziabad, Uttar Pradesh
UL listingUL File No. E511876: UL 467 (US, KDER) and CSA C22.2 No. 41 (Canada, KDER7); certificates dated 2 July 2024
Quality managementISO 9001:2015, Certificate No. IN8514A (Integral Certification (P) Ltd.)
Experience15+ years in earthing and lightning protection
Reference clientsIndian Railways, L&T, NTPC, BHEL, Tata, Adani Power, AAI
DocumentationUL listing, datasheet, test reports, MTC, QAP on request
InspectionClient and third-party inspection accepted
LogisticsPan-India delivery to project site, dispatched from our Ghaziabad factory (Delhi NCR), with support from our dealer and distributor network
Related supplyCouplers, clamps, backfill compound, earth pit covers, lightning protection
Registered office17th floor, The Iconic Corenthum, Sector 62, Noida, Uttar Pradesh 201309
Factory (UL certified)Plot No. 695-696, Duhai Industrial Area, Meerut Road, near HLM College, Ghaziabad, Uttar Pradesh 201206

Request a Techno-Commercial Offer

Send your RFQ with the details below. We reply with a techno-commercial offer, a compliance statement against your specification, and the UL listing for submittal.

RFQ checklist

1

Project name, location and end client

2

Specification clause for grounding electrodes (attach if possible)

3

Rod diameter, length, type (threaded or pointed) and quantity

4

Couplers, clamps and driving studs required, and whether they must also be UL listed

5

Inspection requirements: QAP approval, stage or pre-dispatch TPI

6

Required delivery date and delivery address

7

Billing entity and GST number

Standard commercial terms

TermDetail
Price basisEx-works Ghaziabad / FOR site, per piece
TaxesGST extra at applicable rate
Payment50% Advance Payment

Documents Supplied with Every Order

DocumentWhat it provesWhen you get it
UL certificates, File No. E511876 (US and Canada)Rod is UL 467 and CSA C22.2 No. 41 listedWith the quotation
Product datasheetSizes, materials and specificationsWith the quotation
Test reportsCopper bonding and mechanical testsOn request, for submittal
Material test certificateBatch quality of the supplied rodsWith dispatch
Packing list and invoiceQuantity and sizes shippedWith dispatch

UL Listed Copper Bonded Rod FAQs

References

Technical statements on this page are based on the following standards and published sources:

  1. UL Standards & Engagement, UL 467 Ed. 11-2022: Grounding and Bonding Equipment
  2. UL Solutions, Product iQ certification database
  3. NFPA, NFPA 70: National Electrical Code, sections 250.52 and 250.53
  4. Bureau of Indian Standards, IS 3043: Code of Practice for Earthing
  5. IAEI Magazine, Ground rods: marking and compliance requirements
  6. IAEI Magazine, Ground rod electrodes: what you need to know
  7. EC&M, Driven grounding electrodes: understanding what they are and requirements
  8. nVent ERICO, Copper bonded ground rod datasheet (UL 467 and ANSI/NEMA GR 1 references)
  9. UL Solutions, UL Certificates of Compliance UL-US-L511876-11-41210202-2 and UL-CA-L511876-31-41210202-2 issued to SG Power Products Pvt. Ltd., 2 July 2024
  10. CSA Group, CSA C22.2 No. 41:22, Grounding and Bonding Equipment